Editing The Effects For Bus 3 And Bus 4 - Roland SP-404MK2 Reference Manual

2. Use the [VALUE] knob to select "EFX SET", and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the [SHIFT] button.
3. Turn the [CTRL 3] knob to select "FAVORITE".
4. Turn the [VALUE] knob to select "FAVORITE 1" through "FAVORITE 16".
The effects you selected in "FAVORITE 1" through "FAVORITE 16" are applied to the overall output audio.
5. Use the [CTRL 3] knob to select "BUS 3" or "BUS 4", and press the [VALUE] knob.
The value display is highlighted, and you can now change the effects.
6. Use the [VALUE] knob to select the effect, and press the [VALUE] knob.
This confirms the EFX Type.
7. To finish making the settings, press the [EXIT] button.
Press the [BUS FX] button while holding down the [VALUE] knob to temporarily bypass the BUS 3 and BUS 4 effects.

Editing the Effects for BUS 3 and BUS 4

Here's how to edit the effects (BUS 3, BUS 4) applied to the overall sound.
See "Editing the Effects(P.31)" for how to edit the effects (BUS 1, BUS 2) applied to a sample.
1. Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2. Use the [VALUE] knob to select "EFX SET", and press the [VALUE] knob.
The effect setting screen appears.
Configuring the Various Settings (UTILITY)
95