Roland SP-404MK2 Reference Manual page 62

Combining Samples to Create a Pattern (PATTERN SEQUENCER)
Controller
[DEL] button + [A/F]
button
[DEL] button + [B/G]
button
[HOLD] button
[ROLL] button + [CTRL 1]
knob
[ROLL] button + [CTRL 2]
knob
[ROLL] button + [CTRL 3]
knob
[SHIFT] button + [REC]
button
●
If you press the [RECORD SETTING] button while the pattern is recording, the RECORD SETTING screen is shown. Note that
you can't set the LENGTH or TIME SIGN parameters at this time.
●
Press the [EXIT] button to return to the previous screen.
62
Deletes the notes (for one measure) corresponding to the selected pad.
Deletes the notes (for one measure) corresponding to all pads.
Plays back only the selected pad.
You can record the motion of [CTRL 1] knob in the steps.
* This is enabled when MODE is "TRIG".
You can record the motion of [CTRL 2] knob in the steps.
* This is enabled when MODE is "TRIG".
You can record the motion of [CTRL 3] knob in the steps.
* This is enabled when MODE is "TRIG".
You can switch to TR-REC by pressing the [REC] button while holding down the [SHIFT] button
during pattern playback.
Explanation