Using the Effects
Using the Effects
You can use the built-in effects on the SP-404MK2 to process the audio in unique ways.
Use the built-in effects on the SP-404MK2 by assigning them to a bus (an audio routing inside the SP-404MK2).
With BUS 1 and BUS 2, you can apply the effects that are appropriate for your performance, per sample. BUS 3 and BUS 4 are
mainly used to apply effects to the overall sound output from the SP-404MK2.
There are two kinds of bus routings (in connection order) that you can select as you like.
Refer to
"Configuring the Effect
Routing(P.93)" for how to edit the bus routings.
Routing(P.エラー! ブックマークが定義されていません。)" in EFX SET.
To switch between DRY Routing parameters, see
"DRY
Adding Effects to a Sample (BUS FX)
You can use the various effects built into the SP-404MK2 to process the playback audio in unique ways.
27