Efx Set - Roland SP-404MK2 Reference Manual

Parameter Value
LED 1–10 Sets the brightness of the indicators on the buttons and pads. This sets the brightness when the
Brightness buttons or pads are highlighted.
1–10 Sets the brightness of the indicators on the buttons and pads. This sets the brightness when the
LED Glow
buttons or pads are not highlighted.
This selects the color of the pad illumination.
Pad LED The pads light up in the color set in "BUS COLOR".
BUS
Mode In this mode, the pad colors change according to the bus through which the sample audio is sent.
PAD The pads light up in the color set in "PAD COLOR".
BUS COLOR
Parameter Value
Default, 1–127,
White
BUS1 Color
BUS2 Color
DRY Color
PAD COLOR
Parameter Value
Default, 1–127,
PAD-1–PAD-
White
16

EFX SET

FAVORITE
Parameter Value
TYPE A, TYPE B
Routing
1–16
FAVORITE
Changes the pad color for each bus through which sample audio is sent.
This can be set for BUS 1, BUS 2 and DRY respectively.
This is enabled when Pad LED Mode is "BUS".
●
Hold down the [SHIFT] button and turn the [VALUE] knob to change the value in
steps of 10.
Specifies the colors of individual pads.
This is enabled when Pad LED Mode is "PAD", and when a sample is either playing back
or stopped while in sample mode.
Selects the routing (connection) of the bus to which effects are assigned.
"Configuring the Effect Routing(P.93)"
Selects the combination of effects assigned to BUS 3 and BUS 4.
"Changing the Effects Assigned to BUS 3 and BUS
Explanation
Explanation
Explanation
Explanation
4(P.94)"
Appendix
111