Ko-Da-Ma; Zan-Zou; To-Gu-Ro - Roland SP-404MK2 Reference Manual

Appendix

Ko-Da-Ma

This creates a reverberating audio effect.
Parameter
1/32, 1/16T, 1/32D, 1/16, 1/8T, 1/16D,
TIME 1/8, 1/4T, 1/8D, 1/4, 1/2T, 1/4D, 1/2, 1/1T,
1/2D, 1/1
FEEDBACK 0–99 (%)
SEND 0–100
FLAT, 80, 100, 125, 160, 200, 250, 315,
L DAMP F
400, 500, 630, 800 (Hz)
630, 800, 1000, 1250, 1600, 2000, 2500,
H DAMP F 3150, 4000, 5000, 6300, 8000, 10000,
12500, FLAT (Hz)
SINGLE, PAN
MODE

Zan-Zou

For left and right sounds, this effect applies delay to the negative phase of the sound. This gives the lingering effect of a sonic
"afterimage".
The effect works for stereo sound, and does not have any effect on mono sound.
Parameter
1–100 (when the SYNC parameter is OFF)
1/32, 1/16T, 1/32D, 1/16, 1/8T, 1/16D, 1/8, 1/4T, 1/8D,
TIME
1/4, 1/2T, 1/4D, 1/2, 1/1T, 1/2D, 1/1 (when the SYNC
parameter is ON)
FEEDBACK 0–99
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600,
HF DAMP 2000, 2500, 3150, 4000, 5000, 6300, 8000, OFF (Hz)
LEVEL 0–100
MODE 2TAP, 3TAP, 4TAP
OFF, ON
SYNC

To-Gu-Ro

This gives the sound an undulating effect, based on the image of a coiled-up snake.
Parameter
0–100
DEPTH
0–100 (when the SYNC parameter is OFF)
RATE 1/128, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 1/1, 2/1 (when
the SYNC parameter is ON)
0–100
RESONANCE
0–100
FLT MOD
0–100
AMP MOD
OFF, ON
SYNC
116
Value
Sets how much the effect sound is delayed.
Adjusts how much the effect sound is repeated.
Adjusts the volume of sound sent to the effect.
Sets the frequency range that is attenuated each time the delay
repeats.
When this is set to "SINGLE", the effect sound comes from the
center; and when this is set to "PAN", the effect sound is heard on
the left and the right.
Value
Value
Explanation
Explanation
Sets the sound delay time.
Adjusts the amount of feedback for the effect.
Sets the frequency range at which the effect sound
is attenuated (how clearly defined the afterimage
sounds).
Adjusts the volume of the effect sound.
Sets how the effect sound lingers.
When this is ON, the effect sound synchronizes with
the tempo.
Explanation
Adjusts how much the playback speed should be
slowed down.
Sets the period at which the playback speed is
lowered.
Adjusts the filter's resonance level.
Increasing the value further emphasizes the effect,
for a more unusual sound.
Attenuates the high-frequency range according to
the playback speed.
Attenuates the volume according to the playback
speed.
When this is ON, the effect sound synchronizes with
the tempo.