Advertisement
Available languages
Available languages
4 STS INSTALLATION
1)
On receipt of the goods, check the packaging. Any missing content, damage or other problems must be
reported to the shipping company or to the dealer as soon as possible.
2)
Check that the device received is actually what was requested in your order
3)
Place the STS inside the frame.
4)
Connect the loads to the output sockets of the STS, if possible distribute them evenly.
5)
Check that all parameters are within the specified limits.
6)
Check that the maximum load does not exceed the product specifications.
STS/ITS
16
OMP068032 REV. B
Installation and start-up of STS / ITS 16/32A
Installazione e avviamento STS / ITS 16/32A
Advertisement
Chapters
