Borri STS-16 User Manual

Borri STS-16 User Manual

Static switch for ict, infrastructures and services
Table of Contents

Advertisement

Available languages

Available languages

BORRI STS / ITS 16A-32A
USER MANUAL / MANUALE UTENTE
Static Switch
For ICT, infrastructures and services
Commutatore statico
Per ICT, infrastrutture e servizi

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STS-16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Borri STS-16

  • Page 1 BORRI STS / ITS 16A-32A USER MANUAL / MANUALE UTENTE Static Switch For ICT, infrastructures and services Commutatore statico Per ICT, infrastrutture e servizi...
  • Page 2 USER MANAUL / MANUALE UTENTE Index Code Page English Language STS 16A-32A Safety instructions STS 16A-32A Storage instructions STS 16A-32A General characteritics STS 16A-32A Special features STS 16A-32A Functional description STS 16A-32A LCD display STS 16A-32A Back panel STS 16A-32A Interface RS232 STS 16A-32A USB port...
  • Page 3 Indice Codice Pagina Lingua Italiana STS 16A-32A Istruzione per la sicurezza STS 16A-32A Istruzione per l’immagazzinamento STS 16A-32A Caratteristiche generali STS 16A-32A Particolarità STS 16A-32A Descrizione funzionale STS 16A-32A Display LCD STS 16A-32A Pannello posteriore STS 16A-32A Interfaccia RS232 STS 16A-32A Porta USB STS 16A-32A Connettore allarmi...
  • Page 4: English Language

    ENGLISH LANGUAGE Pagina 4 di 36 OMP68017 Rev. D 24/12/17...
  • Page 5: Safety Instructions

    SAFETY INSTRUCTIONS IMPORTANT: Safety instructions This manual contains important safety information. Carefully follow the instructions when handling, installing, using and maintaining the device. Please read the product manual carefully before installation. Keep the instructions. - Check the device at the time of receipt and report any damage or malfunction to your dealer.
  • Page 6: Storage Instructions

    STORAGE INSTRUCTIONS If the static switch is not used for a prolonged period of time, it must be stored at a moderate temperature and in any case within the range of temperature and humidity expected and indicated in the device's technical specifications. Pagina 6 di 36 OMP68017 Rev.
  • Page 7: General Characteristics

    GENERAL CHARACTERISTICS. The system called STS (Static Transfer Switch) has two independent input sources, Source A (LINE 1) and Source B (LINE 2). Outputs are connected to the loads which, in normal operation, are powered by the supply source A If the source A voltage is missing or is out of range, the system automatically switches the loads to source B.
  • Page 8: Functional Description

    FUNCTIONAL DESCRIPTION. Front view. Description Silence the buzzer (triggered by an Buzzer alarm) It is possible to display the Source selection button information on: Source A, Source B, Load Select the source and it is possible to Information selection button display: Voltage, Current, Frequency, Output Load Switch between sources: Source A...
  • Page 9: Lcd Display

    LCD DISPLAY Symbols Description Source A error Source B error Overload Alarm Buzzer off Display the source that supplies the load Numeric display Pagina 9 di 36 OMP68017 Rev. D 24/12/17...
  • Page 10: Back Panel

    BACK PANEL Shown below is the back of the device with the basic preliminary Information (It will be revised) STS / ITS – 16 (230V – 16A) 1. LINE B Input 2. LINE A Input 3. Output (NO to the left, LO to the right, PE to the top in the middle) 4.
  • Page 11 INTERFACE The STS is equipped with three communication ports and one optional external communication port. RS-232 PORT Pin Definition Type Signal Output Input Earth +12 V Signal USB PORT Pin Signal VBUS Pagina 11 di 36 OMP68017 Rev. D 24/12/17...
  • Page 12: Alarm Connector

    ALARM CONNECTOR The STS is equipped with 5 configurable clean contacts. Each contact is made up of one 24Vdc/1A relay, to see the complete alarm list, refer to Appendix A. Pin Definition Default Signal Common 3 Relay 3 General alarm Relay 4 Overload Common...
  • Page 13 STS INSTALLATION 1) On receipt of the goods, check the packaging. Any missing content, damage or other problems must be reported to the shipping company or to the dealer as soon as possible. 2) Check that the device received is actually what was requested in your order 3) Place the STS inside the frame.
  • Page 14 Pagina 14 di 36 OMP68017 Rev. D 24/12/17...
  • Page 15 STS SUPPLY As soon as a source is connected, the STS will turn on automatically. The LCD will turn on as shown in the left figure and the LEDs will light up. After the start-up, the display is as shown in the right figure, and the LEDs for Sources A and B light up.
  • Page 16: Troubleshooting

    TROUBLESHOOTING If your STS system does not work properly or you are having problems, check the guide below. If the problem persists, please contact your local supplier for assistance. Problem Possible cause Solution Electrical connection not Check the electrical present connection to the STS input Connection values off- Get assistance from a...
  • Page 17: Technical Specifications

    TECHNICAL SPECIFICATIONS TYPE/MODEL STS - 16 STS - 32 INCOME PARAMETERS 200V / 208V / 220V / 230V / 240V Mains voltage (can be set via software: +/- 5%, 10%, 15%, 20%) Voltage range 150Vac~300Vac 50/60 Hz (can be set via software: +/- 5%, 10%, 15%, Input frequency 20%) Input current.
  • Page 18: Error Codes

    ERROR CODES EVENTS CODE Source A not connected Er01 Source B not connected Er02 Incompatible source A Er03 voltage Incompatible source B Er04 voltage Incompatible source A Er05 frequency Incompatible source B Er06 frequency Incompatible source A Er07 frequency and voltage Incompatible source B Er08 frequency and voltage...
  • Page 19 Emergency shut-down Er27 LCD not connected Er28 Overload time out Er29 Transferring fail by sync Er30 setting condition Pre-alarm active Er31 Communication connection ER32 abnormal Pagina 19 di 36 OMP68017 Rev. D 24/12/17...
  • Page 20: Lingua Italiana

    LINGUA ITALIANA Pagina 20 di 36 OMP68017 Rev. D 24/12/17...
  • Page 21: Istruzioni Per La Sicurezza

    ISTRUZIONI PER LA SICUREZZA IMPORTANTE: istruzioni per la sicurezza Questo manuale contiene importanti informazioni sulla sicurezza. Seguire attentamente le istruzioni durante la manipolazione, installazione e uso e manutenzione delle apparecchiature. Leggere attentamente il manuale del prodotto prima dell'installazione. Conservare le istruzioni. - Controllare l'apparecchiatura al momento della ricezione e segnalare eventuali danni o malfunzionamenti al proprio rivenditore.
  • Page 22 ISTRUZIONI PER L’IMMAGAZZINAMENTO. Se il commutatore statico è inutilizzato per un periodo di tempo prolungato deve essere conservato in un clima moderato e comunque nel range di temperature e umidità prevista e indicate nelle caratteristiche tecniche dell’apparato. Pagina 22 di 36 OMP68017 Rev.
  • Page 23: Caratteristiche Generali

    CARATTERISTICHE GENERALI. Il sistema denominato STS ( Static Transfert Switch ) presenta in ingresso due sorgenti indipendenti, Sorgente A ( LINEA 1 ) e Sorgente B ( LINEA 2). In uscita sono collegati i carichi che, in normale esercizio vengono alimentati dalla sorgente di alimentazione A Nel caso in cui la tensione della Sorgente A venga a mancare o sia fuori dal range previsto, il sistema passa automaticamente ad alimentare i carichi tramite la sorgente B.
  • Page 24: Descrizione Funzionale

    DESCRIZIONE FUNZIONALE. Vista frontale. N° Tasto Descrizione Silenzia il buzzer ( attivato a seguito Buzzer di un allarme ) E’ possibile visualizzare sul display le Pulsante di selezione sorgente informazioni relative a: Sorgente A, Sorgente B, Carico Si seleziona la sorgente, ed è Pulsante di selezione informazioni possibile visualizzare: Tensione, Corrente, Frequenza, Carico di uscita...
  • Page 25: Display Lcd

    DISPLAY LCD Simboli Descrizione Errore Sorgente A Errore sorgente B Overload Allarme Buzzer off Visualizzazione della sorgente che alimenta il carico Display numerico Pagina 25 di 36 OMP68017 Rev. D 24/12/17...
  • Page 26: Pannello Posteriore

    PANNELLO POSTERIORE Di seguito viene visualizzato il retro del dispositivo con le informazioni di base preliminari (saranno revisionate) STS / ITS – 16 ( 230V – 16A ) 6. Input LINEA B 7. Input LINEA A 8. Output (NO a sinistra, LO a destra, PE in alto in mezzo) 9.
  • Page 27: Porta Usb

    INTERFACCIA L’STS è provvisto di tre porte di comunicazione ed una porta di comunicazione esterna opzionale. PORTA RS-232 Pin Definizione Tipo Segnale Output Input Terra +12 V Segnale PORTA USB Pin Segnale VBUS Pagina 27 di 36 OMP68017 Rev. D 24/12/17...
  • Page 28 CONNETTORE ALLARMI L’STS è provvisto di 5 contatti puliti configurabili. Ogni contatto è formato da un relè a 24Vdc/1A, per vedere la lista completa degli allarmi si rimanda all’appendice A. Pin Definizione Segnale di default Comune 3 Relè 3 Allarme Generale Relè...
  • Page 29 INSTALLAZIONE STS 1) Al ricevimento della merce, controllare la confezione. Eventuali contenuti mancanti, danni o altri problemi devono essere segnalati alla ditta di spedizione od al rivenditore il più presto possibile. 2) Verificare che il dispositivo ricevuto sia effettivamente quello richiesto dal vostro ordine 3) Riporre l’STS all’interno dello chassis.
  • Page 30 Pagina 30 di 36 OMP68017 Rev. D 24/12/17...
  • Page 31 ALIMENTAZIONE STS Appena una sorgente è connessa, l’STS si accende automaticamente. Il display LCD si accende come nella figura di sinistra ed i led si accendono. Dopo lo start-up, il display è come nella figura di destra, ed i led relativi alle Sorgenti A e B sono accesi.
  • Page 32: Risoluzione Dei Problemi

    RISOLUZIONE DEI PROBLEMI Se il vostro sistema STS non lavora in modo corretto o si riscontrano dei problemi, consultare la guida sotto riportata. Se il problema persiste, si prega di contattare il fornitore locale per l’assistenza. Problema Possibile causa Soluzione Connessione alla linea Verificare la connessione elettrica non presente...
  • Page 33: Specifiche Tecniche

    SPECIFICHE TECNICHE MODELLO STS - 16 STS - 32 PARAMETRI DI INGRESSO 200V / 208V / 220V / 230V / 240V Tensione di ingresso (settabile tramite software: +/- 5%, 10%, 15%, 20%) Range di tensione 150Vac~300Vac 50 / 60 Hz (settabile tramite software: +/- 5%, 10%, 15%, Frequenza di ingresso 20%) Corrente di ingresso...
  • Page 34 CODICI ERRORI EVENTI CODICE Sorgente A non connessa Er01 Sorgente B non connessa Er02 Tensione sorgente A non Er03 conforme Tensione sorgente B non Er04 conforme Frequenza sorgente A non Er05 conforme Frequenza sorgente B non Er06 conforme Frequenza e tensione Er07 sorgente A non conforme Frequenza e tensione...
  • Page 35 conforme Tensione interna 12V relativa alla sorgente B non Er23 conforme Alta temperatura Er24 Errore interno tensione DC Er25 Errore eeprom Er26 Spegnimento di emergenza Er27 LCD non connesso Er28 Overload time out Er29 Transferring fail by sync Er30 setting condition Pre-alarm active Er31 Communication connection...
  • Page 36 Borri S.p.A. - Via 8 Marzo, 2 - 52010 Bibbiena (AR) Italy Tel. +39 0575 5351 - Fax +39 0575 561811 - info@borri.it - www.borri.it Pagina 36 di 36 OMP68017 Rev. D 24/12/17...

This manual is also suitable for:

Sts-32

Table of Contents