Installation; Receipt Of The Sts / Its; Storage; Positioning And Installation - Borri STS 16A User Manual

3 INSTALLATION

3.1

RECEIPT OF THE STS / ITS

Please inspect the device before installing it. In case any damage is noticed from the conditions
of the package and/or from the outside appearance of the equipment, contact the shipping
company or your dealer immediately. The damage statement must be made within 6 days from
receipt of the product and must be notified to the shipping carrier directly. Should the product
need to be returned to the manufacturer, please use the original package.
Danger to persons due to transport damages
Mechanical damage to the electrical components constitutes a serious danger to
persons and property. In case of doubt regarding the non-integrity of the package or
of the product contained therein, contact the manufacturer before carrying out the
installation and/or the start-up.

3.1.1 Storage

The package normally ensures protection from humidity and possible damages during transport.
Do not store the STS / ITS outdoor.
Risk of damage due to inappropriate storage
 For the environmental storage conditions, refer to the indications given for the
installation of the device.
 The device must only be stored in rooms protected from dust and humidity.
 The device cannot be stored outdoor.
3.2

POSITIONING AND INSTALLATION

The STS / ITS 16/32 A must be installed indoor, in a clean and dry room, preferably without
dust or humidity infiltrations. For the environmental conditions in the place of installation, in
compliance with the current legislation.
Special environmental conditions
It is necessary to implement specific protective measures in case of unusual
environmental conditions:
 harmful smoke, dust, abrasive dust;
 humidity, vapour, salt air, bad weather or dripping;
 explosive dust and gas mixture;
 extreme temperature variations;
 bad ventilation;
 conductive or radiant heat from other sources;
 fungus, insects, vermin.
Installation and start-up of STS / ITS 16/32A
Installazione e avviamento STS / ITS 16/32A
OMP68032 REV. B 13