Securing the Phone with a Lock Set and Cable Lock
You can secure the Cisco Unified Wireless IP Phone 7921G to a desk top by ordering the lock set from
Cisco. For more information, refer to the
To install the lock set, use the diagram and follow these steps:
If you want to...
Install the lock set on
the phone
16
Cisco Unified Wireless IP Phone 7921G Accessory
Then...
1. Put the security cable around a post or through a hole in the desktop.
Insert the loops at the ends of the security cable through the C-ring.
2. Insert the C-ring with cable loops through the slot on back of phone.
3. Use the combination lock to secure the ends of the C-ring around cable
loops and phone.
The phone is secured to the desktop area.
4. To secure the desktop charger, use a laptop cable lock.
Guide.
OL-16131-01