Using Phone Buttons; Understanding Lines Vs. Calls - Cisco Unified Wireless IP Phone 7921G Phone Manual

For cisco unified communications manager 7.0
Hide thumbs Also See for Cisco Unified Wireless IP Phone 7921G:
Table of Contents

Advertisement

Using Phone Buttons

The phone keypad and buttons provide these shortcuts to frequently used functions.
If you want to...
Then...
Lock the phone
Press and hold
keypad
status line and the
screen.
Note
Unlock the
Press Unlock. As soon as the screen displays "Unlock
phone keypad
Keypad?", press OK, and the
Note
Toggle between
Press and hold
ring and vibrate
and the
mode
To switch back to the ring mode, press and hold
the screen displays "Vibrate Off!", and the
disappears.
Note
Listen to voice
Press and hold
messages
messaging system.
Adjust the
Press
volume during a
call
Change the ring
When the phone is idle, press
pattern for your
vibrate, or silent mode.
calls

Understanding Lines vs. Calls

To avoid confusion about lines and calls, refer to these descriptions:
• Lines—Each corresponds to a directory number or intercom number that others can use to call
you. Your phone supports up to six lines. To see your phone lines, press
View. You have as many lines as you have directory numbers with phone line icons
View list.
• Calls—Each line can support multiple calls, typically up to four calls. Your phone can support up
to 24 connected calls, but your system administrator might adjust this number according to your
needs. Only one call can be active at any time; other calls are automatically placed on hold.
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0
until "Keypad Locked" displays on the
#
icon appears at the top of the main
The keypad lock is temporarily disabled when you have
an incoming call.
You must press the Unlock and OK softkeys as soon as
they appear, or the keypad remains locked.
*
until the screen displays "Vibrate On!"
icon displays at the top.
You can also use the Volume button to set vibrate.
until the phone connects to your voice
1
@
for a call on the handset, speaker, or headset.
icon disappears.
until
*
icon
to set the ring volume,
An Overview of Your Phone
For more
information, see...
Setting the Keypad
to Automatically
Lock, page 70
Customizing Rings,
page 65
Accessing Voice
Messages, page 81
Using Phone
Buttons, page 27
Customizing Rings,
page 65
to open Line
in the Line
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-7912g

Table of Contents