Customizing The Phone Screen - Cisco Unified Wireless IP Phone 7921G Phone Manual

For cisco unified communications manager 7.0
Hide thumbs Also See for Cisco Unified Wireless IP Phone 7921G:
Table of Contents

Advertisement

Customizing the Phone Screen

You can customize the left softkey (when the phone is idle), your phone screen display brightness, and
the language on your phone screen.
If you want to...
Set up the left softkey to
open the Phone Book
Set up the left softkey to
access your messages
Change the phone display
brightness
Change the length of time
for the screen to display
68
Then...
1. Choose
2. Press Change.
3. Select Phone Book.
4. Press Save. The left softkey will be displayed as "Ph Book" when
the phone is idle.
1. Choose
2. Press Change.
3. Select Message.
4. Press Save. The left softkey will be displayed as "Message" when
the phone is idle.
1. Choose
2. Highlight Display Brightness
3. Press
to increase the brightness or
4. Press Save to make the change or Cancel.
1. Choose
> Phone Settings > Display Settings.
2. Highlight Display Timeout
3. Select one of the following:
• 10 Seconds
• 30 Second (default setting)
• 1 Minute
• 2 Minutes
4. Press Save to make the change or Cancel.
Note
When the display setting time has expired, the screen dims for 10
seconds, then goes dark.
> Phone Settings > Customize Home Page.
> Phone Settings > Customize Home Page.
> Phone Settings > Display Settings.
then press
,
then press
,
or Change.
to decrease the brightness.
or Change.
OL-16131-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-7912g

Table of Contents