Viewing Or Removing Conference Participants - Cisco Unified Wireless IP Phone 7921G Phone Manual

Tip
If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the
message, "Device Not Authorized." For more information, see
page 57.

Viewing or Removing Conference Participants

During a standard (ad hoc) conference, you can view a list of participants and remove participants.
If you want to...
View a list of conference
participants or remove
participants
Get an updated list of
participants
See who initiated the
conference
Remove any conference
participant
Drop the last participant
added to the conference
Verify that a conference call is
secure
Verify that a participant is
calling from a secure phone
Add more participants
End your participation in a
conference
46
Then...
1. Press to select an active conference.
2. Choose Options > ConfList.
Participants are listed in the order in which they join the
conference with the most recent additions at the top.
While viewing the conference list, choose Options > Update.
While viewing the conference list, locate the participant listed at the
bottom of the list with an asterisk (*) next to the name.
While viewing the conference list, highlight the participant's name
and choose Options > Remove.
You can remove participants only if you initiated the conference.
While viewing the conference list, highlight the participant's name
and choose Options > RmLstC.
You can remove participants only if you initiated the conference call.
Look for the or
screen.
Look for the or
phone screen.
See Using Conference, page
Choose , EndCall, or Options > EndCall.
Making and Receiving Secure Calls,
icon after "Conference" on the phone
icon beside the participant's name on the
43.
OL-16131-01