Table of Contents
Advertisement
and serviced, as far as is reasonably practicable, without
causing risk to the maintenance staff and others. Suitable
precautions include decontamination before dismantling,
provision for local filtered exhaust ventilation where the machine
is dismantled, cleaning of the maintenance area and suitable
personal protection.
• Perform a technical inspection at least annually, consisting of,
for example, inspection of filters for damage, air tightness of the
machine and proper function of the control mechanism.
• Besides the operating instructions and the binding accident
prevention regulations valid in the country of use, observe
recognized regulations for safety and proper use.
• When dust removers are used, the rate at which air is
exchanged in the room must be adequate if the exhaust air from
the vacuum cleaner is blown into the room (please observe
regulations valid in your country).
• Before starting work, the operating staff must be informed on
- use of the vacuum cleaner
- risks associated with the material to be picked up
- safe disposal of the picked up material.
• Before transporting the collection tank, close all the locks. Do
not tilt the cleaner if there is liquid in the collection tank. Do not
use a crane hook to lift the cleaner.
• When using an extension lead, check the minimum cross-
sections of the cable:
Cable length
up to 20 m
20 to 50 m
WARNING: When carrying out service or repair operations,
all contaminated items which cannot be satisfactorily cleaned
are to be disposed of; such items shall be disposed of in
impervious bags in accordance with any current regulation
for the disposal of such waste.
Cross section
< 16 A
1.5 mm2
2.5 mm2
7
< 25 A
2.5 mm2
4.0 mm2
Advertisement
Table of Contents
