Table of Contents
Advertisement
WARNING!
CARRYING OUT ANY MAINTENANCE.
1) Keep all safety devices, air vents and the motor housing free of dirt and dust. Use a soft, dry
brush to clean the equipment regularly.
2) Clear all dirt or debris from the collection tank after each use. Allow to dry before replacing the
power head. Do not use cleaning agents or solvents; these may damage the appliance.
3) Check the hose, attachments, and power cord to verify that they have not been damaged or
any debris is trapped and blocking airflow.
1. Cleaning Reusable Cloth Filter
1) Remove the filter and clean by gently tapping or brushing dirt off. For optimal performance it is
recommended to replace the old filter with a new filter regularly.
2) Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water.
Allow the filter to air dry before re-installing (Fig. 10).
2. Cleaning Foam Filter
Remove the foam filter and use a mild soap and water solution to wash and rinse with clean water
(Fig. 11). Allow the filter to air dry before installing and using again.
MAINTENANCE
REMOVE THE POWER CORD FROM THE POWER SUPPLY BEFORE
12
Advertisement
Table of Contents
