Replacing The Staple Cartridge In The Stapler Unit (Staple Finisher-L1/Booklet Finisher-L1) - Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual

Replacing the Staple Cartridge in the Stapler Unit (Staple
Finisher-L1/Booklet Finisher-L1)
When the stapler unit of the Staple Finisher-L1 or Booklet Finisher-L1 is almost out of staples and the staple cartridge in the stapler
unit must be replaced, a screen prompting you to replace the staple cartridge appears on the touch panel display. Follow the
procedure described below to replace the staple cartridge.
Remove the orange seal that holds the staples together after you place the staple cartridge into the staple case.
• The Staple Finisher-L1 and Booklet Finisher-L1 are optional products.
• We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
• Use only staple cartridges intended for use with this machine.
Open the front cover of the fi nisher.
1
*1 Booklet Finisher-L1
*2 Staple Finisher-L1
114
*1 *2