Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual page 269

Additional Information
The Job Build mode is useful if you cannot
load the originals all at once. This mode
enables you to divide the originals into
several parts, scan them, and then print
them all together.
3
How do I change the default
settings for the Copy from the
Color mode to the Black mode?
You can store the current settings
as the default settings from
[Change Default Settings] in
the Copy Basic Features screen. If
the Black mode is set as the default
settings, you can reduce the
printing cost.
Color Selection: Full Color
Color Selection: Black
■ Changing the Color Mode to the
Black Mode:
1. Press [Copy]  [Select Color]  [Black].
■ Setting the Color Mode as the
Default:
1. Press
 [Register]  [Yes].
Additional Information
You can also save paper by using the Image
Combination mode or Two-sided Copy
mode. For more information, see e-Manual
> Copy.
4
Can a mark be applied to the
document that has been scanned?
on
The machine can print a stamp on
the scanned document by using
the Stamp mode.
Vertical Placement
Horizontal Placement
 [Change Default Settings]
Position at which
stamp is applied
Position at which
stamp is applied
Q&A
269