Quicksilver 675CR Owner's Manual page 31

Quicksilver 675CR— System & Component Overview and Operation
Toilet
Rotate the interior step so that the
toilet will not hit it when sliding
into the operational position.
Macerator Switch Location
Dockside Pumpout
The dockside pumpout deck plate is located on the port side bussel and is marked with the ISO symbol
WASTE. The dockside facility will have the proper connections / fittings to pump the holding tank out.
Avoid inadvertent discharge of the black water system.
Always keep the macerator seacock closed when not in use.
The dockside pumpout deck plate does not have a chain
connecting the cap to the deck plate. Use caution not to
drop the deck plate cap into the water.
Unlatch the dead bolt. Using the
notch in the board, slide the toilet
out from the storage position. Lock
dead bolt in forward position.
19
Macerator switch