TAS POWERTEK APFC-05 User Manual page 2

Power Factor Controller APFC-05
These instructions do not purport to cover all details or
variations in equipment, nor to provide for every possible
contingency to be met in connection with installation,
Should further information be desired or should particular
problems arise which are not covered sufficiently for the
purchasers purposes, the matter should be referred to our
The contents of this instruction Manual shall not become
part of or modify any prior or existing agreement or
relationship. Any statements contained herein do not create
new warranties or modify the existing warranty.
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for damages. All
rights are reserved.
Because of continuous improvements efforts by TAS PowerTek in their Product's Features and
Specifications, the Product as well as the content of the User Manual is likely to get updated.
Therefore, please always refer to the User Manual supplied to the customer along with the
Product, at the time of product dispatch.
CAUTIONS:
High voltage!
APFC may only be used indoor!
Make sure that the discharge time set in the controller matches the capacitor discharge time!
This User Manual for TAS APFC-05/xx Controller refers to the Firmware Version 1.0.0
th
Dated: 9 Jan. 2015.
TAS POWERTEK PVT.LTD.
NOTE
operation or maintenance.
office.
VERSION 1.0 Updated on: FEB. 18, 2015