HP Net Vectra Technical Reference Manual page 23
Hp net vectra: reference manual
Hide thumbs
Also See for Net Vectra:
- User manual (34 pages) ,
- Supplementary manual (20 pages) ,
- Troubleshooting manual (32 pages)
Table of Contents
Advertisement
Enable RPO
Flash page select
Bus core frequency BCF2 (connected to SW-5, always 1)
POR# (ExtSMI)
Flash program enable (FLASHLOCK)
Backplane ID0 (always 1)
Backplane ID1 (always 1)
Bus core frequency BCF0 (connected to SW-3, open=1, closed=0)
Bus core frequency BCF1 (connected to SW-4, open=1, closed=0)
Host bus request detect (60/66 MHz) (connected to SW-1, always 0)
Serial EEPROM data
FDD write protect (not used)
Password enable (connected to SW-7, open=1, closed=0)
Clear CMOS (connected to SW-8, open=1, closed=0)
Serial EEPROM chip select
Serial EEPROM clock
Description
2 System Board
Chip-Set
GPIO number
GPIO17
GPIO20
GPIO21
GPIO22
GPIO23
GPIO24
GPIO25
GPIO26
GPIO27
GPIO30
GPIO31
GPIO32
GPIO33
GPIO34
GPIO35
GPIO36
23
Advertisement
Table of Contents
Need help?
Do you have a question about the Net Vectra and is the answer not in the manual?
Questions and answers