Installing A Processor - HP Kayak XU03 Installation Manual

NOTE
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining button
HP Kayak XU 03xx PC Workstation — Installing Accessories In Your HP PC Workstation

Installing a Processor

Installing a Processor
Some operating systems support a second processor for enhanced
performance. Contact your authorized reseller for up-to-date
information.
The Setup program provides an option to disable the second processor.
1 Disconnect the computer's power cord and any LAN or
telecommunications cable.
2 Remove the computer's cover (refer to page 3).
3 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it partly out of the PC Workstation's case.
4 Remove the fan connection to the system board and lift the airflow
guide completely out of the PC Workstation's case.
5 Slide out the power supply to improve access to the processor
sockets refer to page 6, and carefully place the PC Workstation on
its side.
6 Remove the transparent airflow guide covering the processor
sockets.
28 English