Configuring Hp Fastraid - HP Kayak XU04 Installation And Configuration Manual

With FastRAID
Pre-installed

Configuring HP FastRAID

You can configure HP FastRAID to:
Create a new array, and
•
Manage existing arrays on your system's hard disk drives.
•
Before you create a new array, you may need to do the following:
1 Create an ArrayConfig bootable utility diskette from the HP Kayak
XU/XW PC Workstation Drivers and Utilities CD-ROM.
a Insert the Drivers and Utilities CD-ROM into the CD-ROM drive
and a blank, formatted diskette into the floppy disk drive.
b Use Explorer to locate either the
\FASTRAID\ArcfgDRV\
CD-ROM.
c Double click on the file
The ArrayConfig bootable utility diskette has been created.
2 Create an Array 1000 Family driver diskette from the HP Kayak
XU/XW PC Workstation Drivers and Utilities CD-ROM.
a Insert the Drivers and Utilities CD-ROM into the CD-ROM drive
and a blank, formatted diskette into the floppy disk drive.
b Use Explorer to locate the
the Drivers and Utilities CD-ROM.
c Copy all the files and subdirectories in this directory to drive
Ensure that the files
directory
\WINNT
OEMSETUP.INF
The Array 1000 Family driver diskette has been created.
4 English English
\FASTRAID\ARCONFIG\
directory on the Drivers and Utilities
DISKIMG.BAT
\FASTRAID\DRIVERS\
and
DISK1 TXTSETUP.OEM
containing the files
, , , , have been successfully copied.
. . . .
directory on

and the
and
CDA1000.SYS
o o o o r r r r t t t t h h h h e e e e
. . . .
A:\