HP Kayak XU04 Installation And Configuration Manual page 10

Installing Windows
NT 4.0
NOTE
7 When the next menu appears, select the type of application that you
will run on your computer. (Select
what type of application you will use.) ArrayConfig will use your
answer to create the best array configuration for your applications.
8 When the next menu appears, select a boot order for the new array.
Select
• Disk Array will be Boot Drive
from the new array. If you selected
Step 4, booting from an array safeguards the information on your
boot drive.
Select
• Disk Array will not be a Boot Drive
computer to boot from the new array. (If you only have one array,
it will automatically be the boot drive.)
9 When you have finished all these menu selections, wait while
ArrayConfig creates the array. This may take up to 30 minutes,
especially if the disk drives are large.
A message appears when the array has been created. An error
message appears if the ArrayConfig encounters some problems (for
example, an array already exits). If this happens, run ArrayConfig
again and use the Custom Setup option.
10 Press until you're back at the Main Menu, and exit ArrayConfig.
11 Insert the Windows NT setup disk #1 and restart your PC
Workstation.
Do not boot from the Windows NT CD-ROM as the hard drive will not be
detected.
12 When prompted, insert Windows NT Setup Disk 2 and press
.
13 From the Welcome to Setup screen, press
installing Windows NT.
14 Press
your computer.
15 At the prompt, insert Setup Disk 3 and press
Other Applications
if you want your computer to boot
to have Setup detect the mass storage devices on
if you are not sure
Optimized for Data Protection
if you do not want your
to continue
.
English
in
English 7