HP Kayak XU04 Installation And Configuration Manual page 17

19 Press
your computer.
20 At the prompt, insert Setup Disk 3 and press
21 When the Setup program has finished detecting storage devices,
press to configure additional SCSI adapters.
S
22 From the list of adapters, select
custom driver.
23 Insert the Adaptec Array1000 driver diskette in drive A and press
.
24 Press
25 When the driver has finished loading, press
installing Windows NT.
26 At the prompt, re-insert Setup Disk 3 and press
27 Continue installing Windows NT following the on-screen
instructions.
28 When prompted, insert your drivers diskette into drive A and press
. When the driver has finished loading, you can continue
with the Windows NT installation. For more information, refer to
your operating system's documentation on your Drivers and Utilities
CD-ROM.
Managing an Existing Array
You can manage an existing array in the following ways:
Making a bootable array
•
Displaying array information
•
Deleting an array
•
Initializing an array
•
Adding or deleting a spare disks
•
14 English English
to have Setup detect the mass storage devices on
Other
to select the Adaptec Array1000 driver.
.
and press
to continue
to install a
.