Installing Memory - HP Kayak XA05 Installation Manual

CAUTION
HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation

Installing Memory

Main Memory Modules
If you need more main memory to run your application software, you
can install up to 768 MB of memory in three 100 MHz DIMM slots.
Main memory upgrades are available in single non-buffered 32 MB,
64 MB and 128 MB or 256 MB SDRAM memory modules.
Static electricity can damage electronic components. Turn off all
equipment. Do not let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top of the
power supply while you are removing the accessory from the bag.
Handle the accessory as little as possible and with car
To install a main memory module:
1 Disconnect the computer's power cord and any LAN or
telecommunications cable.
2 Remove the computer's cover (refer to page 3).
3 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and remove it from the PC Workstation's case.
Lift the HP UtraFlow
airflow guide forwards
and upwards.
Installing Memory
English 7