HP Kayak XA05 Installation Manual page 14

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation
Installing Mass Storage Devices
9 For a drive in the upper shelf, tighten the four retaining screws on
top of the hard drive unit.
For a drive in the lower shelf, use the four spare screws from the
top (center) of the hard drive unit, to secure the hard disk drive on
either side.
10 Connect the power and the data cables to the rear of the drives.
(The connectors are shaped to go in one way only.)
Power Cable
14 English
Use the four spare screws from
the top of the hard drive unit.
Data Cable