HP Kayak XA05 Installation Manual page 6

Replacing the Power
Supply after Installing
Accessories
HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation
Moving the Power Supply
1 Check that all internal cables are safely routed.
2 Rotate the power supply into the computer. Tilt the back of the
power supply unit until it engages with the computer's case. Adjust
the power supply's cable to ease replacement of the unit.
3 Carefully lower the front of the power supply completely into
the computer, until it clicks into position.
6 English
Tilt the back of the power
supply until it engages with
the computer's case.