HP Kayak XA05 Installation Manual page 4

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation
Removing and Replacing the Cover
Replacing the Cover
1 Ensure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Lower the cover completely onto the computer (aligning the back of
the cover with the inner back edge of the PC Workstation's case),
and firmly slide it backwards into place. Ensure that the retaining
latches click into position.
Align the back of the cover
with the inner back edge of
the PC Workstation's case.
3 If required, lock the cover using the key provided.
4 Reconnect all the power cables and telecommunications cables.
4 English
Ensure that the retaining
latches on either side of
the PC Workstation's
case click into position.