HP Kayak XA05 Installation Manual page 19

Pc workstation

Hide thumbs Also See for Kayak XA05:

Table of Contents

When an IDE CD-ROM

Drive Is Installed

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation

10 Remove the plastic panel from the cover by pulling the panel from

the left and unhinging its right-hand side. Store the panel in a safe

place.

11 Install any other accessories before replacing the cover and

completing the installation.

12 Follow the instructions below to complete the installation.

Completing the Installation of a Drive

1 Switch on the computer and press

2 In the Setup program, select the

submenu. Check that the CD-ROM drive has been detected on the

IDE channel.

3 Press

to save and exit the program.

Installing Mass Storage Devices

Unclip and lift out the

plastic panel.

when

F2 Setup

menu, the

Advanced

appears.

IDE Devices

English

Table of Contents