HP Kayak XA05 Installation Manual page 21

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
5 Hold the board by its "top" edge. Slide it into the board guide of the
chosen slot. Do not bend the board.
6 Align the board's connector with the slot's socket. Firmly press the
board into the socket. Ensure the board's connector engages
completely with the socket and does not touch components on
other boards.
7 Secure the board by replacing the screw. If you loosened the screws
on adjacent slots, remember to tighten them.
8 Install any other accessories before replacing the cover (refer to
page 4).
9 Reconnect all cables and power cords.
Slide the accessory
board into position
Installing Accessory Boards
English 21