HP Kayak XA05 Installation Manual page 12

NOTE
HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation
Installing Mass Storage Devices
Installing a Hard Disk Drive in an Internal Shelf
The internal shelves can house one hard disk drive that is up to
1.6 inches in height, and one hard disk drive of up to 1 inch in height.
1 Disconnect the computer's power cord and any LAN or
telecommunications cable.
2 Remove the computer's cover (refer to page 3).
3 Remove the four (outer) retaining screws from the top of the hard
drive unit.
4 Lift the hard drive unit partly out of the PC Workstation's case and
disconnect the data and power connectors from the existing drive.
5 Remove the hard drive unit from the PC Workstation's case.
6 Place the hard drive unit carefully on a flat surface.
Take care when handling the hard disk drive and ensure that it is
placed on an anti-static bag whenever you set it down.
12 English
Remove the four outer
retaining screws