HP Kayak XA-s02 Supplementary Manual page 5

Follow Flowchart
downwards for
order in dismantling
the desktop
package.
Removing/Installing
CD-ROMs or FDDs
(refer to Step 5, page 8)
Adding a Second
Processor
(refer to Step 7, page 9)
Installing/Removing VRMs
refer to (Step 10, page 12)
Dismantling and Reassembling the Desktop Package
Below is a flowchart showing the steps to follow to service the desktop
package. Each step shows how to remove and reinstall a component.
Removing/Reinstalling
Upper Processor
Airflow Guide
(refer to Step 3, page 7)
Connecting/Reconnecting
FDD, HDD and CD-ROM
cables
(refer to Step 4, page 7)
Removing/Reinstalling
Lower Processor Airflow
Guide + Fan
(refer to Step 6, page 9)
Removing/Reinstalling
Processors
(refer to Step 8, page 10)
Removing/Reinstalling the
Power Supply
(refer to Step 9, page 11)
Removing/Reconnecting
other cables
(refer to Step 14, page 15)
Removing/Reinstalling the
System Board
(refer to Step 15, page 15)
Dismantling and Reassembling the Desktop Package
Start Disassembly
Removing/Replacing
the cover
(refer to Step 1, page 6)
Removing/Installing
Accessory Boards
(refer to Step 2, page 6)
To Remove the System
Board, follow all of the
steps contained in the
shaded box
Adding DIMMs ONLY
Removing/Reinstalling the
Power Supply
(refer to Step 9, page 11)
Removing/Reinstalling the
HDD cage
(refer to Step 11, page 12)
Installing an HDD
(refer to Step 12, page 13)
Adding/Replacing DIMMs
(refer to Step 13, page 13)
Follow Flowchart
upwards to
reassemble the
desktop package.
5