HP Kayak XA-s02 Supplementary Manual page 12

Hp kayak xa-s02: supplementary guide

Hide thumbs Also See for Kayak XA-s02:

NOTE

Step 10: Installing/Removing VRMs

Removal of VRMs is not required to remove the system board. If a second

processor is installed, a second VRM must also be installed (one VRM per

processor).

Step 11: Removing/Reinstalling the HDD Cage

Remove the four screws at

each corner of the HDD cage.

Lift the HDD cage up and

out of the chassis.

To install VRMs, push into

slot until clips click into place.

To remove VRM, press

clips downwards and pull VRM

out of slot.

Table of Contents

Kayak xa-s 02xx Kayak xa-s