HP Kayak XA-s02 Supplementary Manual page 11

Step 9: Removing/Reinstalling the Power Supply
Removing the Power Supply:
Push up on the
underside of the supply forward until the
power supply at the rear edge is clear of the
end closest to the chassis retaining back
internal HDD cage. bezel.
Reconnect the power cables to the HDDs, FDD,
CD-ROM and system board (if disconnected).
Rotate the power supply back into its recess.
Gently pull the cables downwards from underneath
the power supply to free the space.
Rotate the power supply out of its recess so that it
Move the power
sits upside-down on top of the internal HDD cage.
to the internal HDD cage has to be entered first.
Then slide the power supply unit towards the
back of the recess until it fits under the retaining edge
of the rear chassis bezel.
Step 9: Removing/Reinstalling the Power Supply
The end of the power supply unit that is closest
Push the power
supply down into place.
11