HP Kayak XA-s02 Supplementary Manual page 18

Complete the Questionnaire to Check Your Understanding
4 When reassembling the PC Workstation after upgrading the
Pentium II processor, what are the critical step(s) to perform once the
Pentium II has been plugged into its socket with an audible click?
a Reconnect the processor fan to the system board.
b Reconnect the processor fan to the system board AND insert the FDD
cable into the cable clip on the lower processor airflow guide.
c Reconnect the VRM and insert the FDD cable into the cable clip on the
lower processor airflow guide.
d Reconnect the processor fan and the VRM to the system board.
5 In the following list, tick all items that you MUST remove prior to replacing
the system board:
a power supply
b floppy drive
c video controller
d Pentium II processor
e mass storage device cables
f CD-ROM drive
6 In the flowing list, tick what you need to remove in order to have EASY
access to replace a DIMM in the 1st slot:
a power supply
b floppy drive cable
c video controller
d hard disk cardcage
e Processor airflow guide
f CD-ROM drive
Now, turn to the next page to check your answers.
18