Extending To The System For 13 Persons - Olympus U-MDOB3 Instructions Manual

5-5 Extending to the system for 13 persons

The units (gray) areas in the following diagram are BX3-MDOE and U-MDOSV. The system for 9 persons can be
extended to the system for 13 persons by attaching BX3-MDOE and U-MDOSV to two positions in total.
For assembling procedures, see "5-2 Side by side observation system for 2 persons and system for 5 persons" (page 17)
and "5-3 System for 9 persons" (page 22).
Concerning the stands assembled
BX3-MDOE
BX3-MDOE
U-MDOSV
1
119 mm
a
(gray) areas in the following diagram, adjust the stand height written below.
U-MDOB3
U-MDOSV
U-MDOSV
Height of the a portion of the stand
1
Height of the a portion of the stand.
If there is a difference in height between the desk top surface
TIP
where the microscope frame is installed and the desk top
surface where U-MDOSV to be used for extending to the
system for 13 persons is installed, adjust the length of the a
portion of the stand. For example, if the height difference is 5
mm (if the desk top surface of the microscope frame is higher
than the desk top surface of U-MDOSV (extension) to be used
for extending to the system for 13 persons), a will be 124mm.
U-MDOSV
BX3-MDOE
BX3-MDOE
U-MDOSV
U-MDOSV
29