Siemens TS2000 Service Manual page 32

TS2000 Service Manual
SPB7-520.840.01.01.02
4-4
To install a fresh copy of Windows NT, press "N," then
7.
press "Enter."
Leave the disk size as is; press "Enter" to install the
8.
software into the directory "\WinNT," then press "Enter"
twice.
Follow the onscreen instructions.
9.
When the system re-boots, enter the BIOS setup and
10.
change the boot drive back to the hard drive.
Continue to follow the onscreen instructions, press
11.
"Next" twice.
Type in the name and organization information.
12.
Type in the CD code and press "Next." Enter the
13.
password 123456. Confirm the password and press
"Next."
Select "No, do not...." and press "Next" three times.
14.
Select the "Do not connect" radio button and press
15.
"Next," then "Finish."
Select your time zone, and set the date and time
16.
parameters, then press "Close." When you reach this
stage in the WinNT installation, you need to install the
WinNT Service Pack 4.
Insert the WinNT Service Pack 4 into the CD-ROM drive
17.
and select "Install Service Pack 4. Follow the onscreen
instructions.
4.4.1.1 Change the Start Up Time
1. Select Start|Settings|Control Panel|System.
2. Select the Startup/Shutdown tab.
3. Type in or scroll to the setting "5" in the "Show list
for.xx seconds."
4. Click OK and close the Control Panel.
RD7409290-0 Rev. F