Table of Contents
Advertisement
Installation Considerations
MOUNTINg COMPONENTS
The Control Module: This contains electronic components so always mount
this module at a secure location inside the vehicle like under the dash. Ensure
that the module is not succeptable to moisture, excessive vibration, or exces-
sive temperatures (like next to heater hoses).
The Status Light/Valet Button: This may be custom mounted. To custom
mount, select a suitable surface panel in the vehicle with high visibility from all
windows, easy accessibility for the driver, and away from moving parts of the
vehicle. Drill a 5/16" (8mm) hole in the chosen panel, route the harness through
the hole and snap the Status Light/Valet Button into place. Then, plug the two
2-pin connectors into the corresponding port on the control module.
20
Advertisement
Table of Contents
