Table of Contents
Advertisement
for Ventrac Power Units, Attachments, & Accessories
Hydraulic Safety
•
Make sure all hydraulic connections are tight and all hydraulic hoses and tubes are in good condition.
Repair any leaks and replace any damaged or deteriorated hoses or tubes before starting the machine.
•
Hydraulic leaks can occur under high pressure. Hydraulic leaks require special care and attention.
•
Use a piece of cardboard and a magnifying glass to locate sus-
pected hydraulic leaks.
•
Keep body and hands away from pinhole leaks
or nozzles that eject high pressure hydraulic
fl uid. Hydraulic fl uid escaping under high pres-
sure can penetrate the skin causing serious
injury. If hydraulic fl uid is injected into skin, seek
immediate medical attention.
•
Hydraulic system may contain stored energy. Before performing maintenance or repairs on the hydraulic
system, remove attachments, engage parking brake, disengage weight transfer system (if equipped), shut
off engine, and remove ignition key. To relieve pressure on the auxiliary hydraulic system, shut off the power
unit engine and move the secondary S.D.L.A. lever left and right before disconnecting the auxiliary hydraulic
quick couplers.
•
Dispose of all fl uids in accordance with local laws.
SAFETY
General Safety Procedures
Safety - 13
Advertisement
Table of Contents
