Page 1
Assembly Instructions Hygena Chair After the sitting test, Assembly Instructions - Please keep for futrue reference. 249/8940 re - tighten bolts again, if any adjustment needed. It is highly recommend to re - tighten all the bolts again after using the chair for 7 days.
Page 2
Assembly Instructions Safety and Care Advice Important – Please read these instructions fully before starting assembly Attach lock bracket by using screw • Check you have all the • Do not stand or put weight on • To reduce shown in the figure. components and tools listed on the product during assembly, the likelihood of...
Page 3
Assembly Instructions Components Parts If you have damaged or missing components, call the Customer Helpline: 0345 640 0800 Please check you have all the parts listed below Place the chair on the floor. Insert bolts with Note :The quantities below are the correct amount to complete the assembly of 1 chair. spring washers washers through side...
Page 4
Assembly Instructions Components - Fittings Step 1 Please check you have all the fittings listed below pre - drilled hole Note :The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more Attach left and right fittings may be supplied than are required.
Need help?
Do you have a question about the 249/8940 and is the answer not in the manual?
Questions and answers