Inserting A Drive Into The Multibay - HP d325 ST Hardware Reference Manual

Hardware Upgrades

Inserting a Drive into the MultiBay

1. Exit all software applications, turn off the computer properly through the
operating system, then turn off any external devices.
2. Remove any removable media, such as a compact disc, from the drive.
3. With the top of the drive facing up and the drive connector facing the computer,
slide the drive into the MultiBay and push firmly to ensure that the electrical
connector is properly seated.
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers are installed on
the system. If they are not available, they may be downloaded, at no cost, from the
HP Web site at
2-38
www.hp.com.
Hardware Reference Guide