Locating Drive Positions - HP d325 ST Hardware Reference Manual

Hardware Upgrades

Locating Drive Positions

Desktop Drive Positions
3.5-inch drive bay (1.44-MB diskette drive shown)*
1
5.25-inch drive bay for optional drives
2
3.5-inch, internal, standard hard drive bay
3
*If the computer has a 1.44-MB diskette drive installed, it will be
configured with a diskette drive bezel as shown in the illustration. If
the computer contains an empty 3.5-inch drive bay, then a bezel
blank will be installed on the computer instead. If you do not have a
drive in this slot, you may choose to install a 3.5-inch device (such as
a diskette drive, hard drive, or Zip drive) later on. However, to install
a 3.5-inch device other than a diskette drive or hard drive, you must
order the 3.5-inch device bezel (PN 316008-001).
To verify the type, size, and capacity of the storage devices installed in the computer,
run Computer Setup. Refer to the Computer Setup (F10) Utility Guide for more
information.
2-20 Hardware Reference Guide