Inserting a Drive into the MultiBay
1. Exit all software applications, shut down the operating system
software, and turn off the computer if you are inserting or
removing a hard drive.
2. Remove any removable media, such as a compact disc, from the
drive.
3. With the top of the drive facing up (or left, when the computer is
in the minitower position) and the drive connector facing the
computer, slide the drive into the MultiBay and push firmly to
ensure that the electrical connector is properly seated.
4. After inserting an optical drive while the computer is powered on,
restart the computer to ensure the optical drive functions correctly
if it uses recording, backup, or video playback software
applications.
5. Engage the MultiBay security catch, if desired. See
and Releasing the MultiBay Security Catch"
information.
Inserting a Drive into the MultiBay
www.hp.com
Getting Started
"Engaging
for more
7