Routine Computer Care and Shipping Preparation
Optical Drive Precautions
Be sure to observe the following guidelines while operating or cleaning the optical
drive.
Operation
Do not move the drive during opreation. This may cause it to malfunction during
reading.
Avoid exposing the drive to sudden changes in temperature, as condensation may
form inside the unit. If the temperature suddenly changes while the drive is on, wait
at least one hour before you turn off the power. If you operate the unit immediately, it
may malfunction while reading.
Avoid placeing the drive in a location that is subject to high humidity, extreme
tempatures, mechanical vibration, or direct sunlight.
Cleaning
Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened
with a mild solution. Never spray cleaning fluids directly on the unit.
Avoid using any type of solvent, such as alcohol or benzene, which may damage the
finish.
Safety
If any object or liquid falls into the drive, immediately unplug the computer and have
it checked by an authorized HP service provider.
F-2
Hardware Reference Guide