Inserting A Drive Into The Multibay - HP Compaq dc7100 SFF Hardware Reference Manual

Inserting a Drive into the MultiBay

Hardware Reference Guide
1. Remove any removable media, such as a compact disc, from the
drive.
2. If you are not hot-swapping a CD-ROM drive, exit all software
applications, shut down the operating system software, and turn
off the computer.
3. With the top of the drive facing up and the drive connector facing
the computer, slide the drive into the MultiBay and push firmly to
ensure that the electrical connector is properly seated.
Inserting a Drive into the MultiBay
4. After inserting an optical drive while the computer is turned on,
restart the computer to ensure the optical drive functions correctly
if it uses recording, backup, or video playback software
applications.
5. Install the MultiBay security screw, if desired. Refer to
"Uninstalling the MultiBay Security Screw"
information.
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the HP Web site at
www.hp.com
Hardware Upgrades
for more
www.hp.com.
2-39