Inserting A Drive Into The Multibay - HP Compaq d530 SFF Hardware Reference Manual

Inserting a Drive into the MultiBay

Hardware Reference Guide
1. Exit all software applications, turn off the computer properly
through the operating system, then turn off any external devices.
2. Remove any removable media, such as a compact disc, from the
drive.
3. With the top of the drive facing up and the drive connector facing
the computer, slide the drive into the MultiBay and push firmly to
ensure that the electrical connector is properly seated.
Inserting a Drive into the MultiBay
If the device does not start, ensure that the necessary device drivers
are installed on the system. If they are not available, they may be
downloaded, at no cost, from the HP Web site at
www.hp.com
Hardware Upgrades
www.hp.com.
2-39