Plugging Ir Module Irc-Tr V2; Plugging A Supply Voltage Sensor - NetPing 2/PWR-220 v3/ETH User Manual

Table of Contents

Advertisement

[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Plugging External Sensors
A sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with
the help
of flat cable extenders of
be done independently with the help of any wire with a minimum cross section of 0,4 mm
length of a flat cable is 10 m from each sensor to a device (star topology).
Plugging IR
Module IRC-TR v2
Colored Loop
Yellow
Green
Red
Black
A sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with
the help
of flat cable extenders of
be done independently with the help of any wire with a minimum cross section of 0,4 mm
length of a flat cable is 10 m from each sensor to a device (star topology).
Plugging
a Supply Voltage Sensor
A sensor is a «dry contact», therefore the order of connecting wires is irrelevant. The number of plugged sensors is
limited only by a number of free IO lines.
Second wire
The order of connecting wires is irrelevant. Depending on the output (I1-I4) on a terminal block, where a sensor is
plugged in, it is displayed on the same channel IO1-IO4 in a web interface of a device.
IO lines, to which sensors are plugged must be configured as the «input» in an interface of a device!
A sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with
the help
of flat cable extenders of
independently with the help of any wire with a minimum cross section of 0,4 mm
flat cable is 100 m.
RC-4 sensor, which are sequentially plugged one into another. Otherwise, it can
The first wire after a labeled one
The second wire after a labeled one
The third wire after a labeled one
RC-4 sensor, which are sequentially plugged one into another. Otherwise, it can
Loop
First wire
RC-4 sensor, which are sequentially plugged one into another. Or it can be done
Flat Loop
Labeled (red) wire
I1-I4
G
2
. Maximum allowable
Contact Name 
2
. Maximum allowable
Contact Name
2
. Maximum allowable length of a
[ENG] [2PWR,v2SMS] Plugging External Sensors
SC
SD
+
G
                             – 

Advertisement

Table of Contents
loading

This manual is also suitable for:

2/pwr-220 v4/sms

Table of Contents