Table of Contents
Advertisement
[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Device Overview: Appearance
Picture 5 – Back panel
Elements of a Front Panel
•
two ports for connecting to the Ethernet network using plugs of RJ-45 type;
•
«Reset» button to reset a device to default settings;
•
a power cord of a device with a euro plug that is inseparably connected to a device;
•
a jack for plugging GSM antenna (for a
•
a slot for a SIM card installation (for
Ports for connecting to the Ethernet network have two LEDs:
•
CPU – glows continiously, is a device is powered; blinks 5-6 times when a device turns on (in the process of
loading a microprogram); blinks 15-20 times when parameters of a device are reset to default values; blinks
from time to time when a device sends packages to the Ethernet network; blinks intensively when indicating
a software updating mode.
•
RX – glows if a network connection is set (shows the presence of link) and periodically blinks when receiving
packages.
Picture 4 – Front
panel (NetPing 2/PWR-220
(NetPing 2/PWR-220
NetPing 2/PWR-220
a NetPing 2/PWR-220
[ENG] [2PWR,v2SMS] Device Overview: Appearance and Basic Specifications of a Device
v2/SMS device)
v3/ETH,
NetPing 2/PWR-220
v2/SMS device with a built-in GSM modem);
v2/SMS device with a built-in GSM modem)
and Basic Specifications of a Device
v2/SMS devices)
–
Advertisement
Table of Contents
