Table of Contents
Advertisement
[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Resetting Parameters to
User name: visor
Password: ping
IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Gate (gateway): is not set
SNMPcommunity: SWITCH
MAC address: 00 a2 xx xx xx xx
Here, xx xx xx xx corresponds to a serial number of a device. Therefore, all devices have unique MAC addresses
after being manufactured.
After resetting parameters to default values, there is a need to perform an initial configuration of a device – see
more detailed description in the document «Firmware
Description?
description». Where to Get a Document with a Firmware
[ENG] [2PWR,v2SMS] Resetting Parameters to Default Values
Default Values
–
Advertisement
Table of Contents
