Table of Contents
Advertisement
[ENG] NetPing 2/PWR-220 v3/ETH & NetPing 2/PWR-220 v4/SMS, User guide -[ENG] [2PWR,v2SMS] Connecting, Installing, and
[ENG] [2PWR,v2SMS] Connecting, Installing, and Initial
Configuration of a Device
The page has photos of a
To prepare a device for operation, do the next:
1. Take a device out of the box and install on a horizontal surface.
2. Plug a GSM antenna to a device and locate it in the place of a reliable reception of
the cell operator's signal (for
modem). The availability of a signal can be controlled using a cell phone according to
the number of segments in the power indicator on a display of the phone.
3. Insert a SIM card until the click in a corresponding jack on a front panel of a device
(for
a NetPing 2/PWR-220
attention so that a SIM card is turned contacts up.
A
NetPing 2/PWR-220
operators and cannot work with the R-UIM cards of CDMA standard (Skylink).
A SIM-card must be installed only in a
SMS device.
NetPing 2/PWR-220
v2/SMS device in the text.
a NetPing 2/PWR-220
v2/SMS device with a built-n GSM modem). Please, pay
v2/SMS device is designed to work with SIM-cards of GSM
de-energized NetPing 2/PWR-220 v2/
[ENG] [2PWR,v2SMS] Connecting, Installing, and Initial Configuration of a Device
v2/SMS device with a built-in GSM
Initial Configuration of a Device
–
Advertisement
Table of Contents
