Advertisement
7. For I-7000 modules, DCON utility pro terminal can send command to the module.
See user manual Sections 2 for details command.
Configure the module: sending the %AANNTTCCFF command. See user manual
Section 2 for details.
Read data from the input channels: send either the #AA or #AAN command to the
module.
If user doesn't know command, user can select Address and ID, it will show some
8.
refer commands as below. User can select necessary command to test or debug
modules.
I-7052
8 Ch DI DAQ Module- QuickStart (Jul/2016)
ICP DAS USA, Inc. |
www.icpdas-usa.com
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
6
Advertisement
